|
|
Post by kenneth on Oct 5, 2008 14:22:12 GMT -8
So, I compiled up a combine replacement using the SAS hood up hack the problem is they don't throw grenades! They'll do the animation rarely but no grenade shows up. The only console logged error I saw was through developer 2 and it was just "Warning: Deleting orphaned children of npc_grenade_frag" which doesn't tell me much of anything.
Another problem is on occasion they'll stutter while reloading. I've noticed this behavior in normal combine so it probably isn't a big deal.
Anyone have ideas?
Here's my qc -
$modelname "npc/enemies/soldier/soldier01.mdl"
$model "ct_sas" "ct_sas_reference.smd"
$poseparameter move_yaw -180.00 180.00
$poseparameter body_pitch -90.00 90.00
$poseparameter body_yaw -90.00 90.00
$cdmaterials "models\enemies\soldier\soldier01"
$scale "0.95"
$hboxset "cstrike"
$hbox 3 "ValveBiped.Bip01_Pelvis" -8.299 -7.727 -5.429 8.299 2.007 6.583
$hbox 6 "ValveBiped.Bip01_L_Thigh" 4.576 -5.377 -3.432 22.880 3.775 4.576
$hbox 6 "ValveBiped.Bip01_L_Calf" -0.291 -4.295 -3.432 20.883 3.151 3.432
$hbox 6 "ValveBiped.Bip01_L_Foot" -2.288 -1.144 -2.579 5.720 4.576 2.007
$hbox 6 "ValveBiped.Bip01_L_Toe0" -2.860 -2.808 -2.860 4.004 1.196 1.716
$hbox 7 "ValveBiped.Bip01_R_Thigh" 4.576 -5.377 -3.432 22.880 3.775 4.576
$hbox 7 "ValveBiped.Bip01_R_Calf" -0.291 -4.295 -3.432 20.883 3.151 3.432
$hbox 7 "ValveBiped.Bip01_R_Foot" -2.288 -1.144 -2.007 5.720 4.576 2.579
$hbox 7 "ValveBiped.Bip01_R_Toe0" -2.860 -2.808 -1.716 4.004 1.196 2.860
$hbox 3 "ValveBiped.Bip01_Spine1" -9.152 -1.258 -8.008 4.576 11.326 8.008
$hbox 2 "ValveBiped.Bip01_Spine2" -3.068 -3.432 -9.693 13.572 10.317 9.693
$hbox 1 "ValveBiped.Bip01_Neck1" -0.104 -4.576 -2.860 5.512 2.288 2.860
$hbox 1 "ValveBiped.Bip01_Head1" -0.416 -6.240 -3.640 9.360 4.441 3.016
$hbox 4 "ValveBiped.Bip01_L_UpperArm" -1.144 -2.579 -2.288 14.872 2.579 2.288
$hbox 4 "ValveBiped.Bip01_L_Forearm" -1.716 -2.402 -2.402 13.156 2.402 2.402
$hbox 4 "ValveBiped.Bip01_L_Hand" 0.291 -2.465 -1.716 6.583 1.550 2.860
$hbox 5 "ValveBiped.Bip01_R_UpperArm" -1.144 -2.579 -2.288 14.872 2.579 2.288
$hbox 5 "ValveBiped.Bip01_R_Forearm" -1.716 -2.402 -2.402 13.156 2.402 2.402
$hbox 5 "ValveBiped.Bip01_R_Hand" 0.291 -2.465 -2.860 6.583 1.550 1.716
// Model uses material "ct_sas.vmt"
// Model uses material "ct_sas_glass.vmt"
$attachment "grenade0" "ValveBiped.Bip01_Spine" 6.41 3.85 8.73 rotate 68.11 91.48 93.56
$attachment "grenade1" "ValveBiped.Bip01_Spine" 6.23 1.36 8.58 rotate 42.63 88.51 93.85
$attachment "grenade2" "ValveBiped.Bip01_Spine" -0.55 4.14 -8.33 rotate -83.93 63.84 118.98
$attachment "grenade3" "ValveBiped.Bip01_Spine" 0.64 1.28 -8.35 rotate -70.87 -71.14 -105.92
$attachment "pistol" "ValveBiped.Bip01_R_Thigh" 0.76 2.91 -5.93 rotate -1.57 -9.00 75.29
$attachment "primary" "ValveBiped.Bip01_Spine2" 9.00 -4.17 -10.75 rotate -27.69 173.65 -13.75
$attachment "defusekit" "ValveBiped.Bip01_Pelvis" 0.00 1.05 -4.98 rotate -73.06 90.93 179.75
$attachment "eholster" "ValveBiped.Bip01_L_Thigh" 7.83 -5.91 1.49 rotate 80.18 -62.03 112.43
$attachment "lfoot" "ValveBiped.Bip01_L_Foot" 0.00 5.20 0.00 rotate -0.00 0.00 -0.00
$attachment "rfoot" "ValveBiped.Bip01_R_Foot" -0.00 5.20 0.00 rotate 0.00 -0.00 0.00
$attachment "muzzle_flash" "ValveBiped.Bip01_L_Hand" 0.00 -0.00 -0.00 rotate -0.00 -0.00 0.00
$includemodel "combine_soldier_anims.mdl"
$surfaceprop "flesh"
$eyeposition 0.000 0.000 73.000
$illumposition -0.019 -0.882 37.487
$sequence ragdoll "ragdoll" ACT_DIERAGDOLL 1 fps 30.00
$ikchain rhand ValveBiped.Bip01_R_Hand knee 0.707 0.707 0.000
$ikchain lhand ValveBiped.Bip01_L_Hand knee 0.707 0.707 0.000
$ikchain rfoot ValveBiped.Bip01_R_Foot knee 0.707 -0.707 0.000
$ikchain lfoot ValveBiped.Bip01_L_Foot knee 0.707 -0.707 0.000
$collisionjoints "phymodel.smd" {
$mass 100.0
$inertia 10.00
$damping 0.05
$rotdamping 5.00
$rootbone "valvebiped.bip01_pelvis"
$jointrotdamping "valvebiped.bip01_pelvis" 3.00
$jointmassbias "valvebiped.bip01_spine1" 8.00
$jointconstrain "valvebiped.bip01_spine1" x limit -10.00 10.00 0.00
$jointconstrain "valvebiped.bip01_spine1" y limit -16.00 16.00 0.00
$jointconstrain "valvebiped.bip01_spine1" z limit -20.00 30.00 0.00
$jointmassbias "valvebiped.bip01_spine2" 9.00
$jointconstrain "valvebiped.bip01_spine2" x limit -10.00 10.00 0.00
$jointconstrain "valvebiped.bip01_spine2" y limit -10.00 10.00 0.00
$jointconstrain "valvebiped.bip01_spine2" z limit -20.00 20.00 0.00
$jointmassbias "valvebiped.bip01_r_clavicle" 4.00
$jointrotdamping "valvebiped.bip01_r_clavicle" 6.00
$jointconstrain "valvebiped.bip01_r_clavicle" x limit -15.00 15.00 0.00
$jointconstrain "valvebiped.bip01_r_clavicle" y limit -10.00 10.00 0.00
$jointconstrain "valvebiped.bip01_r_clavicle" z limit 0.00 45.00 0.00
$jointmassbias "valvebiped.bip01_l_clavicle" 4.00
$jointrotdamping "valvebiped.bip01_l_clavicle" 6.00
$jointconstrain "valvebiped.bip01_l_clavicle" x limit -15.00 15.00 0.00
$jointconstrain "valvebiped.bip01_l_clavicle" y limit -10.00 10.00 0.00
$jointconstrain "valvebiped.bip01_l_clavicle" z limit 0.00 45.00 0.00
$jointmassbias "valvebiped.bip01_l_upperarm" 5.00
$jointrotdamping "valvebiped.bip01_l_upperarm" 2.00
$jointconstrain "valvebiped.bip01_l_upperarm" x limit -15.00 20.00 0.00
$jointconstrain "valvebiped.bip01_l_upperarm" y limit -40.00 32.00 0.00
$jointconstrain "valvebiped.bip01_l_upperarm" z limit -80.00 25.00 0.00
$jointmassbias "valvebiped.bip01_l_forearm" 4.00
$jointrotdamping "valvebiped.bip01_l_forearm" 4.00
$jointconstrain "valvebiped.bip01_l_forearm" x limit -40.00 15.00 0.00
$jointconstrain "valvebiped.bip01_l_forearm" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_forearm" z limit -120.00 10.00 0.00
$jointrotdamping "valvebiped.bip01_l_hand" 1.00
$jointconstrain "valvebiped.bip01_l_hand" x limit -25.00 25.00 0.00
$jointconstrain "valvebiped.bip01_l_hand" y limit -35.00 35.00 0.00
$jointconstrain "valvebiped.bip01_l_hand" z limit -50.00 50.00 0.00
$jointmassbias "valvebiped.bip01_r_upperarm" 5.00
$jointrotdamping "valvebiped.bip01_r_upperarm" 2.00
$jointconstrain "valvebiped.bip01_r_upperarm" x limit -15.00 20.00 0.00
$jointconstrain "valvebiped.bip01_r_upperarm" y limit -40.00 32.00 0.00
$jointconstrain "valvebiped.bip01_r_upperarm" z limit -80.00 25.00 0.00
$jointmassbias "valvebiped.bip01_r_forearm" 4.00
$jointrotdamping "valvebiped.bip01_r_forearm" 4.00
$jointconstrain "valvebiped.bip01_r_forearm" x limit -40.00 15.00 0.00
$jointconstrain "valvebiped.bip01_r_forearm" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_forearm" z limit -120.00 10.00 0.00
$jointrotdamping "valvebiped.bip01_r_hand" 1.00
$jointconstrain "valvebiped.bip01_r_hand" x limit -25.00 25.00 0.00
$jointconstrain "valvebiped.bip01_r_hand" y limit -35.00 35.00 0.00
$jointconstrain "valvebiped.bip01_r_hand" z limit -50.00 50.00 0.00
$jointmassbias "valvebiped.bip01_r_thigh" 7.00
$jointrotdamping "valvebiped.bip01_r_thigh" 7.00
$jointconstrain "valvebiped.bip01_r_thigh" x limit -25.00 25.00 0.00
$jointconstrain "valvebiped.bip01_r_thigh" y limit -10.00 15.00 0.00
$jointconstrain "valvebiped.bip01_r_thigh" z limit -55.00 25.00 0.00
$jointmassbias "valvebiped.bip01_r_calf" 4.00
$jointconstrain "valvebiped.bip01_r_calf" x limit -10.00 25.00 0.00
$jointconstrain "valvebiped.bip01_r_calf" y limit -5.00 5.00 0.00
$jointconstrain "valvebiped.bip01_r_calf" z limit -10.00 115.00 0.00
$jointmassbias "valvebiped.bip01_l_thigh" 7.00
$jointrotdamping "valvebiped.bip01_l_thigh" 7.00
$jointconstrain "valvebiped.bip01_l_thigh" x limit -25.00 25.00 0.00
$jointconstrain "valvebiped.bip01_l_thigh" y limit -10.00 15.00 0.00
$jointconstrain "valvebiped.bip01_l_thigh" z limit -55.00 25.00 0.00
$jointmassbias "valvebiped.bip01_l_calf" 4.00
$jointconstrain "valvebiped.bip01_l_calf" x limit -10.00 25.00 0.00
$jointconstrain "valvebiped.bip01_l_calf" y limit -5.00 5.00 0.00
$jointconstrain "valvebiped.bip01_l_calf" z limit -10.00 115.00 0.00
$jointmassbias "valvebiped.bip01_head1" 4.00
$jointrotdamping "valvebiped.bip01_head1" 3.00
$jointconstrain "valvebiped.bip01_head1" x limit -50.00 50.00 0.00
$jointconstrain "valvebiped.bip01_head1" y limit -20.00 20.00 0.00
$jointconstrain "valvebiped.bip01_head1" z limit -26.00 30.00 0.00
}
|
|
|
|
Post by †Ms. Rocker Red† on Oct 5, 2008 16:58:02 GMT -8
Oooops. This isn't a "shitload of code for you" VG. That's what I get for not reading his whole post. ;D
|
|
|
|
Post by veteran_gamer on Oct 5, 2008 18:47:31 GMT -8
Thanks Rocker, i appreciate what you did :] Kenny, Check your attachments $attachment "grenade0" "ValveBiped.Bip01_Spine" 6.41 3.85 8.73 rotate 68.11 91.48 93.56
$attachment "grenade1" "ValveBiped.Bip01_Spine" 6.23 1.36 8.58 rotate 42.63 88.51 93.85
$attachment "grenade2" "ValveBiped.Bip01_Spine" -0.55 4.14 -8.33 rotate -83.93 63.84 118.98
$attachment "grenade3" "ValveBiped.Bip01_Spine" 0.64 1.28 -8.35 rotate -70.87 -71.14 -105.92
$attachment "pistol" "ValveBiped.Bip01_R_Thigh" 0.76 2.91 -5.93 rotate -1.57 -9.00 75.29
$attachment "primary" "ValveBiped.Bip01_Spine2" 9.00 -4.17 -10.75 rotate -27.69 173.65 -13.75
$attachment "defusekit" "ValveBiped.Bip01_Pelvis" 0.00 1.05 -4.98 rotate -73.06 90.93 179.75
$attachment "eholster" "ValveBiped.Bip01_L_Thigh" 7.83 -5.91 1.49 rotate 80.18 -62.03 112.43
$attachment "lfoot" "ValveBiped.Bip01_L_Foot" 0.00 5.20 0.00 rotate -0.00 0.00 -0.00
$attachment "rfoot" "ValveBiped.Bip01_R_Foot" -0.00 5.20 0.00 rotate 0.00 -0.00 0.00
$attachment "muzzle_flash" "ValveBiped.Bip01_L_Hand" 0.00 -0.00 -0.00 rotate -0.00 -0.00 0.00THEY ALL HAVE TO GO, you said it yourself, you got an SAS model, that means it has COUNTER-STRIKE attachments and syntaxes made for that client REMOVE ALL ATTACHMENTS, then put the COMBINE SOLDIER ones from ORIGINAL HL2 which to the best of my knowledge..are $attachment "eyes" "valvebiped.bip01_head1" 3.17 -2.37 0.00 rotate -0.00 -80.10 -90.00
$attachment "mouth" "valvebiped.bip01_head1" 0.95 -5.41 -0.00 rotate 0.00 -80.00 -90.00
$attachment "chest" "valvebiped.bip01_spine2" 4.75 3.80 -0.00 rotate 0.00 90.00 90.00
$attachment "cameraeye" "valvebiped.bip01_head1" 4.17 -3.82 -1.17 rotate 90.00 -80.17 0.00
$attachment "forward" "valvebiped.bip01_head1" -0.00 0.00 -0.00 rotate 0.00 -80.00 -90.00
$attachment "anim_attachment_rh" "valvebiped.anim_attachment_rh" 0.00 0.00 0.00 rotate -90.00 -90.00 0.00
$attachment "anim_attachment_lh" "valvebiped.anim_attachment_lh" -0.00 -0.00 0.00 rotate -90.00 -90.00 0.00
$attachment "anim_attachment_head" "valvebiped.bip01_head1" -0.00 0.00 0.00 rotate -90.00 -90.00 0.00Man, you never listen to me, but now its in WRITING you fuck so theres no excuse  Next, check your Hitbox info, again $hboxset "cstrike"
$hbox 3 "ValveBiped.Bip01_Pelvis" -8.299 -7.727 -5.429 8.299 2.007 6.583
$hbox 6 "ValveBiped.Bip01_L_Thigh" 4.576 -5.377 -3.432 22.880 3.775 4.576
$hbox 6 "ValveBiped.Bip01_L_Calf" -0.291 -4.295 -3.432 20.883 3.151 3.432
$hbox 6 "ValveBiped.Bip01_L_Foot" -2.288 -1.144 -2.579 5.720 4.576 2.007
$hbox 6 "ValveBiped.Bip01_L_Toe0" -2.860 -2.808 -2.860 4.004 1.196 1.716
$hbox 7 "ValveBiped.Bip01_R_Thigh" 4.576 -5.377 -3.432 22.880 3.775 4.576
$hbox 7 "ValveBiped.Bip01_R_Calf" -0.291 -4.295 -3.432 20.883 3.151 3.432
$hbox 7 "ValveBiped.Bip01_R_Foot" -2.288 -1.144 -2.007 5.720 4.576 2.579
$hbox 7 "ValveBiped.Bip01_R_Toe0" -2.860 -2.808 -1.716 4.004 1.196 2.860
$hbox 3 "ValveBiped.Bip01_Spine1" -9.152 -1.258 -8.008 4.576 11.326 8.008
$hbox 2 "ValveBiped.Bip01_Spine2" -3.068 -3.432 -9.693 13.572 10.317 9.693
$hbox 1 "ValveBiped.Bip01_Neck1" -0.104 -4.576 -2.860 5.512 2.288 2.860
$hbox 1 "ValveBiped.Bip01_Head1" -0.416 -6.240 -3.640 9.360 4.441 3.016
$hbox 4 "ValveBiped.Bip01_L_UpperArm" -1.144 -2.579 -2.288 14.872 2.579 2.288
$hbox 4 "ValveBiped.Bip01_L_Forearm" -1.716 -2.402 -2.402 13.156 2.402 2.402
$hbox 4 "ValveBiped.Bip01_L_Hand" 0.291 -2.465 -1.716 6.583 1.550 2.860
$hbox 5 "ValveBiped.Bip01_R_UpperArm" -1.144 -2.579 -2.288 14.872 2.579 2.288
$hbox 5 "ValveBiped.Bip01_R_Forearm" -1.716 -2.402 -2.402 13.156 2.402 2.402
$hbox 5 "ValveBiped.Bip01_R_Hand" 0.291 -2.465 -2.860 6.583 1.550 1.716
WRONG AGAIN to the best of my knowledge, this is the combine soldier hbox set $hboxset "default"
$hbox 2 "valvebiped.bip01_spine" -0.950 -4.503 -6.859 6.650 7.857 6.441
$hbox 1 "valvebiped.bip01_head1" -1.663 -7.600 -3.325 6.887 3.800 3.325
$hbox 4 "valvebiped.bip01_l_upperarm" -1.900 -2.612 -2.612 11.400 2.612 2.612
$hbox 4 "valvebiped.bip01_l_forearm" 0.000 -2.318 -2.043 9.500 1.957 2.232
$hbox 4 "valvebiped.bip01_l_hand" 0.237 -0.950 -1.900 5.463 0.950 1.900
$hbox 5 "valvebiped.bip01_r_upperarm" -1.900 -2.612 -2.612 11.400 2.612 2.612
$hbox 5 "valvebiped.bip01_r_forearm" 0.000 -2.138 -2.138 9.500 2.138 2.138
$hbox 5 "valvebiped.bip01_r_hand" 0.475 -0.912 -2.213 5.225 0.988 2.479
$hbox 6 "valvebiped.bip01_l_thigh" 1.016 -2.850 -2.850 17.974 4.750 3.800
$hbox 6 "valvebiped.bip01_l_calf" 0.475 -3.325 -2.660 14.725 3.325 3.040
$hbox 6 "valvebiped.bip01_l_foot" -0.475 -1.425 -1.900 5.225 4.275 2.375
$hbox 6 "valvebiped.bip01_l_toe0" -0.237 -1.663 -2.081 3.087 0.712 2.337
$hbox 7 "valvebiped.bip01_r_thigh" 0.950 -5.225 -3.325 18.050 3.325 3.325
$hbox 7 "valvebiped.bip01_r_calf" 0.475 -3.810 -2.441 14.725 3.790 2.783
$hbox 7 "valvebiped.bip01_r_foot" -1.188 -3.800 -2.138 4.987 1.900 2.138
$hbox 7 "valvebiped.bip01_r_toe0" -0.950 -0.712 -2.470 2.850 1.663 1.995
$hbox 0 "valvebiped.bip01_pelvis" -6.650 -4.275 -7.600 6.650 4.275 4.750
$hbox 0 "valvebiped.bip01_spine2" -0.950 -4.037 -6.887 12.350 7.838 6.887now, keep in mind $SCALE command can be useful, $0.95 was OneManShow[/b]'s recommendation, which is pretty much right, but i found doing them MANUALLY is the best, there's nothing like the human eye. FINALLY dude, if you're trying to create a combine soldier from an sas, and want him to bend, twist and turn faithful to the original, might as well use the $joint syntaxes from the original combine_soldier.mdl in hl2 $mass 100.0
$inertia 2.00
$damping 0.01
$rotdamping 0.40
$rootbone "valvebiped.bip01_pelvis"
$jointmerge "valvebiped.bip01_pelvis" "valvebiped.bip01_spine1"
$jointconstrain "valvebiped.bip01_spine2" x limit -48.00 48.00 0.00
$jointconstrain "valvebiped.bip01_spine2" y limit -25.00 25.00 0.00
$jointconstrain "valvebiped.bip01_spine2" z limit -25.00 50.00 0.00
$jointconstrain "valvebiped.bip01_r_upperarm" x limit -50.00 57.00 0.00
$jointconstrain "valvebiped.bip01_r_upperarm" y limit -19.00 102.00 0.00
$jointconstrain "valvebiped.bip01_r_upperarm" z limit -93.00 30.00 0.00
$jointconstrain "valvebiped.bip01_l_upperarm" x limit -50.00 57.00 0.00
$jointconstrain "valvebiped.bip01_l_upperarm" y limit -102.00 19.00 0.00
$jointconstrain "valvebiped.bip01_l_upperarm" z limit -93.00 30.00 0.00
$jointmassbias "valvebiped.bip01_l_forearm" 2.00
$jointconstrain "valvebiped.bip01_l_forearm" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_forearm" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_forearm" z limit -120.00 4.00 0.00
$jointmassbias "valvebiped.bip01_l_hand" 4.00
$jointconstrain "valvebiped.bip01_l_hand" x limit -120.00 120.00 0.00
$jointconstrain "valvebiped.bip01_l_hand" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_hand" z limit -57.00 70.00 0.00
$jointmassbias "valvebiped.bip01_r_forearm" 2.00
$jointconstrain "valvebiped.bip01_r_forearm" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_forearm" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_forearm" z limit -120.00 4.00 0.00
$jointmassbias "valvebiped.bip01_r_hand" 4.00
$jointconstrain "valvebiped.bip01_r_hand" x limit -120.00 120.00 0.00
$jointconstrain "valvebiped.bip01_r_hand" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_hand" z limit -57.00 70.00 0.00
$jointconstrain "valvebiped.bip01_r_thigh" x limit -25.00 39.00 0.00
$jointconstrain "valvebiped.bip01_r_thigh" y limit -8.00 75.00 0.00
$jointconstrain "valvebiped.bip01_r_thigh" z limit -97.00 32.00 0.00
$jointmassbias "valvebiped.bip01_r_calf" 2.00
$jointconstrain "valvebiped.bip01_r_calf" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_calf" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_calf" z limit -12.00 126.00 0.00
$jointmassbias "valvebiped.bip01_head1" 2.00
$jointconstrain "valvebiped.bip01_head1" x limit -20.00 20.00 0.00
$jointconstrain "valvebiped.bip01_head1" y limit -25.00 25.00 0.00
$jointconstrain "valvebiped.bip01_head1" z limit -13.00 30.00 0.00
$jointconstrain "valvebiped.bip01_l_thigh" x limit -25.00 20.00 0.00
$jointconstrain "valvebiped.bip01_l_thigh" y limit -73.00 6.00 0.00
$jointconstrain "valvebiped.bip01_l_thigh" z limit -93.00 30.00 0.00
$jointmassbias "valvebiped.bip01_l_calf" 2.00
$jointconstrain "valvebiped.bip01_l_calf" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_calf" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_calf" z limit -8.00 126.00 0.00
$jointmassbias "valvebiped.bip01_l_foot" 4.00
$jointconstrain "valvebiped.bip01_l_foot" x limit -1.00 -1.00 0.00
$jointconstrain "valvebiped.bip01_l_foot" y limit -19.00 19.00 0.00
$jointconstrain "valvebiped.bip01_l_foot" z limit -15.00 35.00 0.00
$jointmassbias "valvebiped.bip01_r_foot" 4.00
$jointconstrain "valvebiped.bip01_r_foot" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_foot" y limit -21.00 6.00 0.00
$jointconstrain "valvebiped.bip01_r_foot" z limit -15.00 35.00 0.00
$animatedfriction 1.000 1000.000 0.800 0.500 0.000
} [/b] hope it helps... ....shit it'd better! also, ill have those screenshots for the HUD tonight, sorry i didnt have them ready upon request in the chamber, alright man good luck |
|
|
|
Post by veteran_gamer on Oct 5, 2008 18:49:13 GMT -8
ALSO, DONT FORGET TO ADJUST THE PHYMODEL.SMD TO MATCH THE MODEL, collision models go hand in hand with its overall behavior, especially physics my nigg
or else you'll have clipping issues upon $sequence ragdoll deaths possibly even falling through the floor
|
|
|
|
Post by kenneth on Oct 6, 2008 16:30:29 GMT -8
Oneman beat ya too it, vet! But.. $attachment "anim_attachment_lh" "valvebiped.anim_attachment_lh" -0.00 -0.00 0.00 rotate -90.00 -90.00 0.00 $attachment "anim_attachment_head" "valvebiped.bip01_head1" -0.00 0.00 0.00 rotate -90.00 -90.00 0.00 Didn't work. It says it was an invalid attachment or unknown or some shit. Oneman told me to add this instead: $attachment "lefthand" "ValveBiped.Bip01_L_Hand" 3.50 -0.50 0.00 rotate -0.00 0.00 -0.00 $attachment "righthand" "ValveBiped.Bip01_R_Hand" 3.50 -0.50 -0.00 rotate -0.00 -0.00 0.00 And it worked though! Soooo that PLUS the shit you showed me above, I've gotten those guys running smooth as butter  I really appreciate the shit you do for me, brother! Oneman fixed the problem, but you went beyond that and gave me a lot. Can't ask for more than that. Thanks mother fucker!  |
|
|
|
Post by veteran_gamer on Oct 6, 2008 18:04:38 GMT -8
you're god damned welcome, boy
you're gonna BURN IN HELL BOY
|
|
I really appreciate the shit you do for me, brother! Oneman fixed the problem, but you went beyond that and gave me a lot. Can't ask for more than that. Thanks mother fucker! 